Underlayment

When starting a major project- like re-roofing your home. You should make sure that you are covering every aspect of it. Protect your investment, and make this the last roof you'll ever need.

Underlayment.

There are multiple options are far as underlayment goes. Different types of warranties for each, different styles of underlayment, and different pricing.

Titanium UDL 25
- 8 times lighter and 20 times stronger than 30 lb felt
- 30 year limited warranty
- 6 Month UV exposure

-- Does not dry out, crack or leech oils in the heat. Nor does it crack in the cold

Titanium UDL 30

- 30 year limited warranty

- Does not dry out, crack or leech oils in the heat. Nor does it crack in the cold

- 100% synthetic, therefore totally unaffected by water.

- Advance resin surface that provides a safe walking surface

Titanium PSU 30

- 30 year limited warranty

- Industry ONLY self sealing lap system

- All temperature performance

- 3month UV exposure

Modernized Metal

When thinking about Tin- most tend to think about the old school Tin.

Metal Roofing has come a long ways over the years. There is no better time then the present to do some freshening up and remodeling. 

Don't fall into the mix of people who think Metal Roofing is just for the outside of your house.

 Take the Metal inside! 

From bathroom walls, to living room ceilings.

Be bold!

Roll Formers

For Metal Roof panel manufacturers who play by the rules, the current regime of product approval and local enforcement puts them at a significant disadvantage. 

One quality assurance professional estimates that for every legitimate portable roll former in Florida, there are four operating without proper documentation and without quality assurance. Lack of quality assurance means that metal panels of questionable and unknown quality are finding their way onto the rooftops of Florida's residents.

To ensure that your metal is the best of the best- Having a Manufacturer handle the roll forming may be more beneficial than you thought.

•  Reduced labor and material handling
• Greater accuracy, uniformity and consistency throughout both the individual piece and production lots.
• More surface-friendly for prepainted, precoated and preplated metals.
•  Faster, continuous production with reduced cost-per-piece. 
• Speedier assembly resulting from part uniformity and tighter tolerances.

DIY- Magnetic Metal Picture Holder

Ever need to get a last minute gift? If you're like me- you have. With a few simple steps and a small materials list, you can have a gift ready in minutes!

Here's what you'll need:
Sheet Metal
Fabric
Ribbon
Drill
Hot Glue Gun

Instructions:

Drill two holes in the top of the sheet metal. You will use these holes for the ribbon. Attach the fabric tightly to the backside of the sheet metal using a hot glue gun. Using scissors, poke through the fabric where the holes are at the top of the sheet metal. Thread the two ends of the ribbon from the back of the board to the front of the board. Leave enough of a ribbon loop to hang the board, then tie the ribbon in a knot or bow. Snip the ends of the ribbon and hang!

DIY- Metal Calendar!

I am all for things that are big and exaggerated. So this larger than most- calendar was calling my name. What initially pushed me away from this, was the price tag. The large sum of $500! What surprised me even more, was knowing how much cost could be cut just by turning into a DIY.

Here’s what you’ll Need:
1 piece of Sheet Metal
Dividing Tape- I would use thin Washi tape
Magnetic Numbers

First you’ll want to order a piece of sheet metal, In the picture below the dimensions are a lot larger than I would go. Personally, 4'X4' would be a nice size Calendar. Then, go down to your local Arts and Crafts store and purchase the accessories. Use the Washi tape to make your spaces for the days of the week. Place the Magnetic Numbers in the appropriate spot to match the current month. And- you’re done.

To add a little color to this project, you can order a different color of Sheet Metal!